Lab-Flex®
Lab-Flex® cables are manufactured in accordance with Florida RF Labs® specifications. The high velocity low loss tape-wrapped dielectric provide up to 40% lower loss than conventional cables. Custom braids provide superior mechanical strenght and shielding greater than 90dB. |
|
Semi-Rigid
Semi-Rigid offers the best shielding performance of all cable assemblies. Assemblies are shipped to customer specification drawings and are ready to use when received. Unbent assemblies can be provided for final shaping at the installation site (proper forming tools required.) Special connectors must be used for low-loss cable because of the larger diameter of the cable center conductor. |
|
Conformable®
The Conformable® BJ cable family offers the option of a hand-formable replacement to Semi-Rigid cable with only a slight isolation and loss penalty. Florida RF Labs® BJ series of hand-formable cable uses Conformable® cable. Our hand-formable cable assemblies come with a metal foil under the copper-tin composite shield. This design greatly improves electrical and mechanical performance. |
|
Standard Flexible
This group of cable includes familiar RG cable part numbers that have been superseded by MIL-C-17 numbers and alternative custom cable with improved electrical performance over standard M17 cables. The cables have been grouped by outside diameter. All standard cables supplied by Florida RF Labs® are purchased to the MIL-C-17 specification and no longer carry the RG designation. For example, RG316 has been replaced by M17/113-RG316. |
|
Specialty
The Specialty Family includes the K-Jumper, which is an inexpensive, high frequency interconnect. The Florida RF Labs Space-FlexTM line includes Semi-Rigid and Flexible cable assemblies. Delay Lines, Baluns and Transformers are available for customer applications. |
|
Space Semi-Rigid
Florida RF Labs Space Semi Rigid cable assemblies are available in the most common sizes and match well with miniature high frequency connectors such as 2.4mm and SMP. The 141 cable matches well with 2.9mm and SMA connectors. Assemblies are provided to length with formed bends per mechnical forms or customer provided specifications. |
|
